How to fit a towbar to your car?

Attaching towbars to your car can be very helpful if you are not very willing to spend that huge amount on a towing truck. So, if you are going to tow your car for some distance, then you should make sure that you attach the tow bar the right way. You would like to go for different options depending on the distance and the towing vehicle. Here are some tips on Auckland towbar installation that will help you nail it.

  1. Choose the right towbar

You can either go for a towbar or a tow dolly. The basic difference is that a tow bar pulls your vehicle on all four wheels while a tow dolly lifts the frontal portion of your car, putting the entire stress on the hind pair of wheels. Fitting a tow dolly requires some manual effort as the vehicle needs to be lifted and can be a little problematic if you are going to attach and reattach it frequently. Therefore, if you are going to have frequent stops, then tow bars are going to be more convenient. The overall cost of both is the same.

  1. Towbar design

When it comes to design, there are two options for you. You can either choose a motor home mounted Auckland towbar installation or a car mounted towbar. A motor home mounted towbar is attached to the receiving end of the motorhome hitch receiver and odes nod need to be detached when it is not in use. The car mounted towbar is fitted to the front of the vehicle to be towed. This towbar is comparatively easier to install and uninstall.

  1. Finding the mounting area

The towbar should be attached to that part of the car, which offers a strong built and will not come off easily under the weight of the vehicle. Bumpers are a good area. The other end of the towbar will then be attached to the rear of the towing vehicle. Make sure that the towbars are screwed in tightly as they should be able to provide a strong hold and evenly distribute the pulling force.

  1. Drill out holes and secure the towbar

For Auckland towbar installation, you will be required to drill holes into the car frame. This is where the crews will get attached. Measure the diameter of the bolts and drill hole accordingly. This may require two people for preciseness. When the holes are ready, secure the brackets for the towbar. The bolts are best secured when fitted together with a washer. Finally, tighten them using socket wrenches.

  1. Wire the towbar

It is safer to have the brake lights wired. So make sure that you include wiring along with Auckland towbar installation and check if the electrical systems are working. You could also use tail lights for easier removability. This will ensure the safety of both you and the other vehicles on the road.

  1. Attach safety chains

Using the towbar and pivot brackets are not enough. You should always use safety chains while towing a vehicle. This will avoid potential accidents if ever the tow bar gets unhitched from the towed vehicle.